Remove All Filters

Show result in:

Threaded rod, Zinc plated steel, 3/8"-16

Threaded rod

Threaded rod length is measured from end to end.

Threaded rod length

Click on a product # for additional info

Prod. #	Length	Each price	Bag price	Price	Buy
23637	1 ft	$1.65 / ea	$13.36 / 10	$1.65 / ea $13.36 / 10
23648	2 ft	$2.92 / ea	$23.59 / 10	$2.92 / ea $23.59 / 10
23660	3 ft	$3.73 / ea	$75.28 / 25	$3.73 / ea $75.28 / 25
23683	6 ft	$7.82 / ea	$157.95 / 25	$7.82 / ea $157.95 / 25

Cost of all entered products: $0.00

Add All Entered

Matching Products

Click on a product # for additional info

Prod. #	Description	Buy
2650	Hex nuts, Zinc plated steel, 3/8"-16 A standard six sided nut.	Add $0.10 / ea $6.58 / 100 $52.60 / 1,000
2996	USS flat washers, Zinc plated steel, 3/8" USS pattern is the most common type of flat washer.	Add $0.09 / ea $6.02 / 100 $51.20 / 1,000
2978	SAE flat washers, Zinc plated steel, 3/8" SAE pattern is a tighter fit on the bolt and a smaller outside diameter.	Add $0.06 / ea $4.33 / 100 $36.80 / 1,000
12116	Coupling nuts, Zinc plated steel, 3/8"-16 x 1-3/4" A long nut used to connect pieces of threaded rod or other male threaded fasteners.	Add $1.08 / ea $38.68 / 50 $356.00 / 500
24799	Forged eye nuts, Zinc plated steel, 3/8"-16 Forged nuts with an oval link used to secure cable, wire and chain.	Add $12.38 / ea $48.40 / 5 $89.00 / 10

Add All Entered

See also

Metric threaded rod

Metric threaded rod

A fully threaded rod with no head or drive. Commonly used in manufacturing, automotive, electrical, plumbing, and general construction applications.

Fully threaded studs

Fully threaded studs, Zinc plated steel, 3/8"-16

A fully threaded headless fastener commonly used with two nuts or with a nut in a tapped hole. For lengths of 1ft or greater, see Threaded rod.