Sheet metal screws, Self drilling
|
Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillips screw driver. Self drilling screws have a drill bit point.
-
Stainless steel 410
A corrosion resistant steel alloy. A stainless alloy that is harder than 18-8 stainless steel, but not as resistant to corrosion.
-
Zinc plated steel
Heat treated for adequate strength. Zinc plated for moderate corrosion resistance.
|
Pan heads are slightly rounded with short vertical sides. Star drive is a Torx® compatible drive, designed to minimize the risk of cam-out (stripping). Self drilling screws have a drill bit point.
|
Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a phillips screw driver. Self drilling screws have a drill bit point.
-
Stainless steel 410
A corrosion resistant steel alloy. A stainless alloy that is harder than 18-8 stainless steel, but not as resistant to corrosion.
-
Zinc plated steel
Heat treated for adequate strength. Zinc plated for moderate corrosion resistance.
|
Hex washer heads are six sided for use with a wrench and have a built in washer. Self drilling screws have a drill bit point.
-
Stainless steel 410
A corrosion resistant steel alloy. A stainless alloy that is harder than 18-8 stainless steel, but not as resistant to corrosion.
-
Zinc plated steel
Heat treated for adequate strength. Zinc plated for moderate corrosion resistance.
|
Hex washer heads are six sided for use with a wrench and have a built in washer. An oversize self drilling point that is able to drill through thicker gauge steel.
|
A hexagonal head for use with a wrench with a metal-backed neoprene sealing washer and a drill bit point. Self drilling screws have a drill bit point.
-
Stainless steel 410
A corrosion resistant steel alloy. A stainless alloy that is harder than 18-8 stainless steel, but not as resistant to corrosion.
-
Zinc plated steel
Heat treated for adequate strength. Zinc plated for moderate corrosion resistance.
|