Machine screws, Star drive flat head, Stainless steel 18-8, #10-24

Flat head machine screw length is measured from the top of the head to the end of the screw.

Phillips flat head machine screw length

Note: Thread length on machine screws can vary. Some longer lengths will be partially threaded.

Resources

Click on a product # for additional info

Prod. #	Length	Buy Each	Buy Bag	Bag Qty	Buy Bulk	Bulk Qty
19187	1/2"	$0.19 Add $0.19 each $13.38 / 100 $120.00 / 1000	$13.38 Add	100	$120.00 Add	1000
19188	3/4"	$0.21 Add $0.21 each $14.74 / 100 $132.00 / 1000	$14.74 Add	100	$132.00 Add	1000
19189	1"	$0.24 Add $0.24 each $16.15 / 100 $144.00 / 1000	$16.15 Add	100	$144.00 Add	1000

Click on a product # for additional info

Prod. #	Description	Buy
2560	Hex machine screw nuts, Stainless steel 18-8, #10-24 A hex nut in smaller sizes for machine screw diameters under 1/4.	Add $0.06 each $3.10 / 100 $27.70 / 1000
2552	Hex lock nuts nylon insert, Stainless steel 18-8, #10-24 A hex nut with a nylon ring to resist loosening.	Add $0.08 each $4.99 / 100 $42.50 / 1000
2946	Flat washers, Stainless steel 18-8, #10 General use flat washer	Add $0.06 each $2.42 / 100 $19.30 / 1000
2955	Lock washers, Stainless steel 18-8, #10 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.05 each $2.17 / 100 $18.90 / 1000
2939	Finishing washers, Stainless steel 18-8, #10 Decorative washers for use with oval or flat head screws.	Add $0.07 each $3.39 / 100 $29.70 / 1000