Machine screws, Phillips flat head, Zinc plated steel, #8-32

Flat head machine screw length is measured from the top of the head to the end of the screw.

Phillips flat head machine screw length

Note: Thread length on machine screws can vary. Some longer lengths will be partially threaded.

Resources

Click on a product # for additional info

Prod. #	Length	Each price	Bag price	Bulk price	Price
9334	1/4"	$0.11 / ea	$3.73 / 100	$30.50 / 1,000	$0.11 / ea $3.73 / 100 $30.50 / 1,000
9335	5/16"	$0.11 / ea	$3.80 / 100	$30.90 / 1,000	$0.11 / ea $3.80 / 100 $30.90 / 1,000
1497	3/8"	$0.11 / ea	$4.04 / 100	$32.90 / 1,000	$0.11 / ea $4.04 / 100 $32.90 / 1,000
9336	7/16"	$0.12 / ea	$4.28 / 100	$34.80 / 1,000	$0.12 / ea $4.28 / 100 $34.80 / 1,000
1498	1/2"	$0.13 / ea	$4.51 / 100	$36.80 / 1,000	$0.13 / ea $4.51 / 100 $36.80 / 1,000
1499	5/8"	$0.13 / ea	$4.64 / 100	$38.00 / 1,000	$0.13 / ea $4.64 / 100 $38.00 / 1,000
1500	3/4"	$0.13 / ea	$5.12 / 100	$41.80 / 1,000	$0.13 / ea $5.12 / 100 $41.80 / 1,000
9337 4	7/8"	$0.21 / ea	$8.43 / 100	$68.80 / 1,000	$0.21 / ea $8.43 / 100 $68.80 / 1,000
1501	1"	$0.13 / ea	$5.68 / 100	$46.40 / 1,000	$0.13 / ea $5.68 / 100 $46.40 / 1,000
1502	1-1/4"	$0.15 / ea	$6.07 / 100	$49.10 / 1,000	$0.15 / ea $6.07 / 100 $49.10 / 1,000
1503	1-1/2"	$0.18 / ea	$7.03 / 100	$57.20 / 1,000	$0.18 / ea $7.03 / 100 $57.20 / 1,000
9338	1-3/4"	$0.20 / ea	$7.85 / 100	$64.30 / 1,000	$0.20 / ea $7.85 / 100 $64.30 / 1,000
1504	2"	$0.20 / ea	$8.70 / 100	$70.80 / 1,000	$0.20 / ea $8.70 / 100 $70.80 / 1,000
9339	2-1/4"	$0.33 / ea	$15.31 / 100	$125.00 / 1,000	$0.33 / ea $15.31 / 100 $125.00 / 1,000
1505	2-1/2"	$0.25 / ea	$13.30 / 100	$108.00 / 1,000	$0.25 / ea $13.30 / 100 $108.00 / 1,000
1506	3"	$0.30 / ea	$15.84 / 100	$129.00 / 1,000	$0.30 / ea $15.84 / 100 $129.00 / 1,000
15975	4"	$0.33 / ea	$18.36 / 100	$150.00 / 1,000	$0.33 / ea $18.36 / 100 $150.00 / 1,000

4 This item is a semi-standard size and is therefore more expensive.

Cost of all entered products: $0.00

Click on a product # for additional info

Prod. #	Description	Buy
2644	Hex machine screw nuts, Zinc plated steel, #8-32 A hex nut in smaller sizes for machine screw diameters under 1/4".	Add $0.07 / ea $2.00 / 100 $16.00 / 1,000
2621	Hex nylon insert lock nuts, Zinc plated steel, #8-32 A hex nut with a nylon ring to resist loosening.	Add $0.11 / ea $4.22 / 100 $35.00 / 1,000
2974	SAE flat washers, Zinc plated steel, #8 SAE pattern is a tighter fit on the bolt and a smaller outside diameter.	Add $0.05 / ea $1.75 / 100 $14.80 / 1,000
3021	Lock washers, Zinc plated steel, #8 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.07 / ea $1.71 / 100 $14.30 / 1,000