US Fasteners |
Bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. Also known as hex cap screws or machine bolts.
|
Bolts with no drive and machine threads for use with a nut.
|
Large wood screws technically called lag screws.
|
Screws for wood to wood fastening applications such as decks, docks and ledgers, etc.
|
Nuts have internal machine threads, for use with machine thread bolts and screws.
|
Used to spread the load of a bolt or screw over a larger area or to help prevent loosening under vibration.
|
Studs, threaded rod, unthreaded rod and keystock for industrial, machining and manufacturing applications.
|
Fasteners for anchoring in stone, concrete, brick and drywall, etc.
|
Bolts or screws with a circular ring on the head.
|
U shaped bolts with machine threads for use with a nut on both ends.
|
Shackles are used for a wide range of lifting and pulling applications.
|
An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension.
|