Sheet metal screw

Sheet metal screws, Self tapping, 2-1/2"

Screws with coarse threads and a pointed end for use in sheet metal sometimes also used in plastic, fiberglass, or wood.

Sheet metal screws, Self tapping, 2-1/2"

Phillips pan head

Phillips pan head

Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillips screw driver.

Slotted pan head

Slotted pan head

Pan heads are slightly rounded with short vertical sides. Slotted drive has a simple slot for a flat bladed screw driver.

  • Stainless steel 18-8
Square drive pan head

Square drive pan head

Pan heads are slightly rounded with short vertical sides. Square drive is designed to reduce the risk of cam-out (stripping) and allow single-handed installation.

  • Stainless steel 18-8
  • Zinc plated steel
Spanner pan head sheet metal screws

Spanner pan head

Pan heads are slightly rounded with short vertical sides. Spanner (a.k.a. snake eyes) is a tamper resistant drive that requires a special driver to install.

  • Stainless steel 18-8
Phillips flat head

Phillips flat head

Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Stainless steel 18-8
  • Stainless steel 316
  • Zinc plated steel
Slotted flat head

Slotted flat head

Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drive has a simple slot for a flat bladed screw driver.

  • Stainless steel 18-8
Square drive flat head

Square drive flat head

Flat heads are countersunk (cone shaped under the head) with a flat top. Square drive is designed to reduce the risk of cam-out (stripping) and allow single-handed installation.

  • Stainless steel 18-8
  • Zinc plated steel
Phillips oval head

Phillips oval head

Oval heads are countersunk (cone shaped under the head) with a rounded top. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Stainless steel 18-8
  • Stainless steel 316
Slotted oval head

Slotted oval head

Oval heads are countersunk (cone shaped under the head) with a rounded top. Slotted drive has a simple slot for a flat bladed screw driver.

  • Stainless steel 18-8
Phillips truss head

Phillips truss head

Truss heads are wide with a low profile rounded top. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Stainless steel 18-8
Slotted hex washer head

Slotted hex washer head

A slotted hex washer head can be installed with either a wrench or a flat bladed screw driver, and has a built-in washer.

  • Stainless steel 18-8
  • Zinc plated steel

See also

Modified truss head self drilling drywall screw

Drywall screws, Phillips modified truss head, Self drilling

Modified truss heads have a low profile rounded top with a large bearing surface. Phillips drive is x-shaped for installation with a phillips screw driver.

Modified truss head drywall screw

Drywall screws, Phillips modified truss head, Piercing point

Modified truss heads have a low profile rounded top with a large bearing surface. Phillips drive is x-shaped for installation with a phillips screw driver.

Wood screw

Wood screws

Screws with a smooth shank and tapered point for use in wood.