Phillips oval machine screw

Machine screws, Oval, Stainless steel 18-8, #10-24

Machine screws, Oval, Stainless steel 18-8, #10-24

Phillips oval head

Phillips oval head

Oval heads are countersunk (cone shaped under the head) with a rounded top. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Stainless steel 18-8
Slotted oval head

Slotted oval head

Oval heads are countersunk (cone shaped under the head) with a rounded top. Slotted drive has a simple slot for a flat bladed screw driver.

  • Stainless steel 18-8
Spanner oval head machine screws

Spanner oval head

Oval heads are countersunk (cone shaped under the head) with a rounded top. Spanner (a.k.a. snake eyes) is a tamper resistant drive that requires a special driver to install.

  • Stainless steel 18-8

Matching Products

Click on a product # for additional info

Prod. # Description Buy
2560
Hex machine screw nuts, Stainless steel 18-8, #10-24
A hex nut in smaller sizes for machine screw diameters under 1/4.
Add
$0.06 each
$3.10 / 100
$27.70 / 1000
2552
Hex lock nuts nylon insert, Stainless steel 18-8, #10-24
A hex nut with a nylon ring to resist loosening.
Add
$0.08 each
$4.99 / 100
$42.50 / 1000
12021
K-Lock nuts, Stainless steel 18-8, #10-24
A nut with an attached free-spinning external tooth lock washer.
Add
$0.08 each
$5.26 / 100
$48.90 / 1000
2946
Flat washers, Stainless steel 18-8, #10
General use flat washer
Add
$0.06 each
$2.42 / 100
$19.30 / 1000
2955
Lock washers, Stainless steel 18-8, #10
Split lock washers place tension against a nut after tightening, to help prevent loosening.
Add
$0.05 each
$2.17 / 100
$18.90 / 1000
2939
Finishing washers, Stainless steel 18-8, #10
Decorative washers for use with oval or flat head screws.
Add
$0.07 each
$3.39 / 100
$29.70 / 1000

See also

Metric machine screw

Metric machine screws

Screws with machine threads for use with a nut or in a tapped hole.

Socket product

Socket screws

Screws with an allen wrench drive.