Machine screws, Phillips flat head, Stainless steel 316, #4-40

Flat head machine screw length is measured from the top of the head to the end of the screw.

Phillips flat head machine screw length

Note: Thread length on machine screws can vary. Some longer lengths will be partially threaded.

Resources

Click on a product # for additional info

Prod. #	Length	Each price	Bag price	Bulk price	Price
16880	3/16"	$0.06 / ea	$4.01 / 100	$35.30 / 1,000	$0.06 / ea $4.01 / 100 $35.30 / 1,000
16881	1/4"	$0.06 / ea	$4.26 / 100	$37.50 / 1,000	$0.06 / ea $4.26 / 100 $37.50 / 1,000
16882	5/16"	$0.07 / ea	$4.35 / 100	$38.30 / 1,000	$0.07 / ea $4.35 / 100 $38.30 / 1,000
16883	3/8"	$0.07 / ea	$4.97 / 100	$43.70 / 1,000	$0.07 / ea $4.97 / 100 $43.70 / 1,000
16884	1/2"	$0.08 / ea	$5.27 / 100	$46.40 / 1,000	$0.08 / ea $5.27 / 100 $46.40 / 1,000

Cost of all entered products: $0.00

Click on a product # for additional info

Prod. #	Description	Buy
15998	Hex machine screw nuts, Stainless steel 316, #4-40 A hex nut in smaller sizes for machine screw diameters under 1/4".	Add $0.13 / ea $8.44 / 100 $76.00 / 1,000
16003	Hex nylon insert lock nuts, Stainless steel 316, #4-40 A hex nut with a nylon ring to resist loosening.	Add $0.07 / ea $6.59 / 100 $59.30 / 1,000
22976	Flat washers, Stainless steel 316, #4 General use flat washer	Add $0.08 / ea $3.50 / 100 $28.00 / 1,000
22977	Lock washers, Stainless steel 316, #4 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.05 / ea $1.93 / 100 $16.20 / 1,000
20948	Finishing washers, Stainless steel 316, #4 Decorative washers for use with oval or flat head screws.	Add $0.10 / ea $6.62 / 100 $60.90 / 1,000