Machine screw

Machine screws, Phillips, Zinc plated steel, 1/4"-20

Machine screws, Phillips, Zinc plated steel, 1/4"-20

Phillips pan head

Phillips pan head

Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Zinc plated steel
Phillips flat head

Phillips flat head

Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a phillips screw driver.

  • Zinc plated steel

Matching Products

Click on a product # for additional info

Prod. # Description Buy
2648
Hex nuts, Zinc plated steel, 1/4"-20
A standard six sided nut.
Add
$0.05 each
$1.49 / 100
$11.90 / 1000
2624
Hex lock nuts nylon insert, Zinc plated steel, 1/4"-20
A hex nut with a nylon ring to resist loosening.
Add
$0.05 each
$2.19 / 100
$18.80 / 1000
7299
K-Lock nuts, Zinc plated steel, 1/4"-20
A nut with an attached free-spinning external tooth lock washer.
Add
$0.06 each
$2.97 / 100
$23.90 / 1000
2994
USS flat washers, Zinc plated steel, 1/4"
USS pattern is the most common type of flat washer.
Add
$0.05 each
$1.55 / 100
$12.80 / 1000
2976
SAE flat washers, Zinc plated steel, 1/4"
SAE pattern is a tighter fit on the bolt and a smaller outside diameter.
Add
$0.05 each
$1.56 / 100
$12.70 / 1000
3024
Lock washers, Zinc plated steel, 1/4"
Split lock washers place tension against a nut after tightening, to help prevent loosening.
Add
$0.05 each
$1.15 / 100
$9.40 / 1000

Related Products

Phillips bits

Phillips driver bits

Bits for standard phillips screws.

See also

Metric machine screw

Metric machine screws

Screws with machine threads for use with a nut or in a tapped hole.

Socket product

Socket screws

Screws with an allen wrench drive.