You are here:
Metric washers
Washers provide a greater bearing surface under the fastener. This helps prevent a nut, bolt or screw from pulling through the material.
Choose your washer type and material.
Metric flat washers
|
Metric lock washers
|
Metric high collar lock washers
|
Metric external tooth lock washers
|
Metric internal tooth lock washers
|
Metric fender washers
| Metric flat washers |
Used under the head of a bolt or nut to distribute the forces applied when tightening.
|
A-2 stainless is equivalent to 18-8 stainless. It is an alloy with high corrosion resistance and is the material of choice for most exterior and marine applications.
|
|
Made from medium carbon steel and zinc plated. Best for general hardware use where high strength is not required. Standard metric thread pitches.
|
|
Made from alloy steel quenched, tempered, and zinc plated. Best for automotive use and other areas where high strength is needed.
|
 A grade 8.8 fastener with a bright mirror-like finish providing sharp looks for a variety of applications.
|
|
| Metric lock washers |
Lock washers place tension against a nut after tightening, to help prevent the nut from loosening.
|
A-2 stainless is equivalent to 18-8 stainless. It is an alloy with high corrosion resistance and is the material of choice for most exterior and marine applications.
|
|
Made from medium carbon steel and zinc plated. Best for general hardware use where high strength is not required. Standard metric thread pitches.
|
A grade 8.8 fastener with a bright mirror-like finish providing sharp looks for a variety of applications.
|
|
| Metric high collar lock washers |
High Collar lock washers are designed to fit under the head of a socket cap screw.
|
Made from heat treated alloy steel. Best for applications where extreme strength and hardness are required. Black oil (plain) finish. Not recommended for exterior use.
|
|
Stainless steel 18-8 is an alloy of steel with high corrosion resistance. Stainless has become the material of choice for exterior and most marine applications.
|
|
| Metric external tooth lock washers |
Uses external teeth for locking and tension.
|
A-2 stainless is equivalent to 18-8 stainless. It is an alloy with high corrosion resistance and is the material of choice for most exterior and marine applications.
|
|
| Metric internal tooth lock washers |
Uses internal teeth for locking and tension. Less aggressive than external with a smaller outside diameter.
|
A-2 stainless is equivalent to 18-8 stainless. It is an alloy with high corrosion resistance and is the material of choice for most exterior and marine applications.
|
|
| Metric fender washers |
Used to distribute the forces applied when tightening. Fender washers have a larger outside diameter than standard. Available in 1 size per diameter. The outside diameter is not as large as U.S. sizes, but larger than a standard metric flat washer.
|
A-2 stainless is equivalent to 18-8 stainless. It is an alloy with high corrosion resistance and is the material of choice for most exterior and marine applications.
|
|
|
